When you are just starting out as a metal detector hobbyist, you want to make sure that you get a machine that will satisfy you and not frustrate you. Metal detectors come with all kinds of features, but when you are just starting out, you only need to focus on the basics. Here, I will cover the best meal doctors for a beginner.
You also want the metal detector to feel comfortable with you. Don’t get one that is too heavy. Remember that you will be carrying this thing around for hours. Three pounds might not seem like a lot, but after a while even that gets heavy. You probably want something lighter than 3 lbs.
There are two basic types of metal detectors, VLF(very low frequency) and PI(pulse induction). PI detectors can achieve greater depths, but VLF detectors are better at telling the difference between unwanted and wanted targets. VLF detectors are usually less expensive and are the preferred choice for a beginner hobbyist.
Basic Features of a metal detector:
•Target ID: This is a display that shows you where your target is (or might be). It can be an LCD screen with images or numbers. The numbers are more precise, but if you don’t understand them then they aren’t helpful. The graphics are more easy-to-read.
•Depth Indicator: Again, this can be visual or numeric. The visual diagrams are simple to understand. The accuracy of the actual depth depends on the type of soil, so you can’t depend on this fully, although it helps immensely. General-purpose metal detectors are usually set to search depths of 8-12 inches.
•Pinpoint Mode: This mode allows you to more clearly locate a target. You can also do this with a hand-held probe. Knowing exactly where to dig is a huge time-saver.
•Discrimination: This is the way you filter the metals you are searching for. Your metal detector “discriminates” between the different metals and alloys that it detects. A high discrimination setting will filter out the trash, but your depth will be reduced. Be aware that although the discrimination feature can be helpful, it can also cause you to miss good targets.
•Sensitivity: The level of sensitivity you use needs to be adjusted according to your environment. By lowering the sensitivity, you can reduce false signals in places like high-trash areas. This can cause you to miss some good targets too. Beginners are advised to just dig everything because something of value is often hiding underneath that piece of junk.
•Ground Balancing: This is the way you cancel out the negative effects of soil mineralization so that you can detect targets without the false signals coming from the ground. Some detectors do this automatically.
•Frequency: The number of times the signal is transmitted and received each second is referred to as the operating frequency. It is measured in kilohertz (kHz). Most general-purpose metal detectors are VLF (very low frequency) because lower frequencies are more sensitive to copper and silver and get better depth detection. Higher frequencies are more sensitive to gold, so gold prospectors will use either a VLF with a higher frequency or else a PI (pulse induction) metal detector.
•Coil: There are two basic types of coils. “Concentric” coils get more depth. “Wide scan” coils search a wider area; these are also called “DD” coils because of the shapes of their antennae. There are also different shapes and different sized coils available. Some coils are round and some are elliptical. The elliptical ones cover a bit more ground. Some basic coil sizes are 4”, 6”,8”, 10”, 12”, and 15”. Larger coils can detect deeper than small coils, but smaller coils have better sensitivity.
The four basic types of metal detectors are treasure hunting, relic hunting, coin shooting, and gold prospecting. If you have a specific thing you are looking for, then you can choose your metal detector accordingly. Some are geared towards certain things; gold, especially, requires a certain type of detector. As a beginner, though, you will most likely be happy to find anything of value. A general-purpose metal detector is what most people start with. Any one of these five metal detectors is a good choice for an entry-level metal detector hobbyist.
2.Garrett Ace 150
Garrett is a trusted brand for metal detectors. Buying a name-brand machine is a good idea because it will be easier to turn around a re-sell. Inevitably, you will want to upgrade once you get more skilled. You might even be able to use your findings to purchase a new, more expensive machine with more features. This machine, though, is a great one to start out on. It is highly rated and very affordable. It comes with three pre-programmed search modes for metal, jewelry, and coins. It also has three easily adjustable depth settings and four sensitivity levels.
3.Bounty Hunter QuickSilver
This metal detector is so easy to use that it is even recommended for kids. It has only one search mode and the ground balancing is fixed; you don’t need to adjust anything, you can turn it on and go. The digital display accurately distinguishes metals into four categories, and there are three audio feedback tones to alert you to different types of metal as well. The one-touch depth control button control can be used to adjust the sensitivity level; depth is shown as shallow, medium, or deep. This is an affordable and versatile metal detector. More affordable metal detector, click here!
4. Tesoro Compadre
This is a very light metal detector; it weighs only 2 pounds! Don’t think that means it is a cheaply made machine though, it comes with a lifetime warranty; this says a lot and isn’t offered by other companies. The Compadre has a single knob, which makes it very user-friendly. Turning the knob adjusts the discrimination. This detector runs at a higher frequency, 12 kHz. The higher frequency means it is more capable of picking up gold signals.
5. Si Robertson Signature Treasure Commander TC1X
This metal detector definitely looks cool with its camouflage pattern. Phil and Uncle Si Robertson have both attached their names to metal detectors since metal detecting is becoming just about as popular as Duck Dynasty. This metal detector, in particular, is great for beginners. Its looks are appealing, including the pistol grip, and its automatic features take the frustration out of finding good stuff and not just junk. This metal detector is heavier; it weighs 3.10 pounds, so you have to be a bit of a tough guy to pack it around all day.
Learn how to use the metal detector properly by visiting the link below: